NEC MobilePro 790 - Manual (Page 70)

4-14 Using the NEC MobilePro
Removing PC Cards
Follow these steps to remove a PC card from the MobilePro.
1. Locate the PC card eject button beside the PC card slot and press it to
release the card from the slot.
2. Once the card is released, pull it the rest of the way out of the slot.
Using CompactFlash Cards
Your NEC MobilePro comes with a CompactFlash card slot that supports
one Type I or Type II CompactFlash card. A CompactFlash card provides
a storage device for your MobilePro and when inserted, creates a Storage
Card 2 folder. To view the contents of the folder, double tap the My
Handheld PC icon on your MobilePro desktop, then double tap the
Storage Card 2 folder.
Windows CE supports the hot swapping of
CompactFlash cards. However, to avoid data loss, do not remove a
CompactFlash card while in use.
When using a CompactFlash card in the MobilePro, also use AC power.
The batteries alone may not provide enough power for some
CompactFlash cards to operate properly.
Note
Use the AC adapter when using CompactFlash cards. Using the
adapter can help you avoid potential data loss caused by the high-energy
consumption of some CompactFlash cards.
Inserting CompactFlash Cards
Follow these steps to install a CompactFlash card.
1. With the CompactFlash card facing up, insert it into the
CompactFlash card slot.