NEC MobilePro 790 - Manual (Page 76)

4-20 Using the NEC MobilePro
3. Locate the full reset button inside of the battery bay, as indicated in
the following figure.
Full reset button
A – Full reset button B – Battery connectors
4. Using the stylus, press the full reset button. This resets the unit and
restores your system to its original shipping configuration.
You may be able to use a recent backup of your data to restore your
system to a more recent configuration. Refer to MicroSoft
ActiveSync on your host PC or the section in Chapter 3, “Backing Up
and Restoring Your Data,” for details about backing up and restoring
your MobilePro.
Using the FlashROM Configuration Utility
The MobilePro 790 provides the Internal FlashROM Configuration
Utility, which allows for the instant recovery of customized applications
even after a cold boot.
In Windows CE devices, the cold boot process erases either applications
installed in SDRAM or system files stored in SDRAM for applications
that are installed in FlashROM. In either case, users have to reinstall these
applications to recover the whole system after a cold boot (except for the
HPC default software).