NEC DAC Battery N8103-102 - Manual (Page 10)

viii
Installation, Relocation, Storage, and Connection
CAUTION
Do not connect any interface cable with the power cord of the server plugged
to a power source.
OFF
Make sure to power off the server and unplug the power cord from a power outlet
before connecting/disconnecting any interface cable to/from the server. If the
server is off-powered but its power cord is plugged to a power source, touching a
cable or connector may cause an electric shock or a fire resulted from a short
circuit.
Do not use any unauthorized interface cable.
NEC
„
„
„
„
„
„
Use only interface cables authorized by NEC and locate a proper device and
connector before connecting a cable. Using an unauthorized cable or connecting a
cable to an improper destination may cause a short circuit, resulting in a fire.
Also, observe the following notes on using and connecting an interface cable.
„ Do not step on the cable.
„ Do not place any object on the cable.
„ Do not use the server with loose cable connections.
„ Do not use any damaged cable connector.
„ Make sure the cable is securely locked with screw.