NEC DAC Battery N8103-102 - Manual (Page 59)

37
13. Fill the replacement date (year and month) on the battery label coming with the
battery pack. Then put the label on the PCI bracket. The old label may be either
peeled off or left. If left, put the new label on the old one.
Set up Date
Y .M
Fill the year and month.
Example) Y
2006
M
5
14. Connect the battery connector of the BBU to that of the disk array controller with
battery cable.
NOTE: The BBU has two battery cable connectors. Either of two
connectors may be used. Select either connector appropriate to your
system environment (e.g., location to install in the server and cable
routing condition) to connect the battery cable.