NEC DAC Battery N8103-102 - Manual (Page 46)

24
5. Names and Functions of Sections
This section describes the sections of the BBU.
Front view
1
2
3 4
5 6
1 Battery case
Contains lithium ion battery pack.
2 Battery cable
Used to connect the BBU to the disk array controller.
3 Full-height PCI bracket
Used to fix the BBU to a PCI slot (PCI/PCI-X slot or PCI-Express slot) of the server.
To install the BBU to a low-profile PCI slot, replace the bracket with the low-profile PCI bracket
coming with the BBU.
4 PCI connector
Insert the PCI connector into a PCI slot of the server.
5 Battery cable connectors
Used to connect the battery cable to the BBU. Either of two connectors may be used. Select
either connector appropriate to your system environment (e.g., location to install in the server
and cable routing condition).
6 N code label
Indicates the N code given for this BBU.
N8103-102