Novatel GNSS Receiver and Antenna SMART-AG - Manual (Page 59)

SMART-AG User Manual Rev 5 59
A.2 SMART-AG Specifications
INPUT/OUTPUT CONNECTORS
SMART-AG COM/PWR
+8 to +36 V DC at 2.5 W (typical while logging)
a
For the cable pinouts and drawings, see Section A.2.1, SMART-AG
Power/Communications Development Kit Cable (01018256) starting
on Page 61
a. When tracking GPS satellites.
Serial Com Ports RS-232 F Compliant (Rx and Tx signals only)
CAN SAE J1939/ ISO 11783/ ISO 11898 Compliant
Emulated Radar Output High= Supply Voltage -0.5V Minimum
Low= 0.5V Maximum
Load= 3K Ohm Minimum
PPS Output 3.3 V CMOS Logic Compatible
MKI Input 3.3V CMOS Logic/ 5V Tolerant
INPUT/ OUTPUT CONNECTOR PROTECTION
Electrical Conducted/
Coupled disturbance
tolerance
ISO 7637:2002 (Survives all pulse types)
LED INDICATORS
More details can also be found in Section 2.2.2, Status Indicators starting on Page 25
PHYSICAL
Size
155.3 x 66.8 x

155 mm
b
b.

denotes diameter, here and in the Dimensions graphic on Page 60.
Weight 495 g maximum
ENVIRONMENTAL
Operating Temperature -40 C to +75C
Storage Temperature -55 C to +90C
Humidity Not to exceed 95% non-condensing
Immersion MIL-STD-810F Method 512.4 Procedure 1
Vibration
c
c. See also the Notice section of this manual starting on Page 13.
Random MIL-STD-810F Method 514.5 C17
Sinusoidal IEC 68-2-6 ASAE EP455, 5.15.2 Level 1
Shock MIL-STD-810 F Method 516.5