Novatel GNSS Receiver and Antenna SMART-AG - Manual (Page 68)

68 SMART-AG User Manual Rev 5
Table 12: Handshaking
Binary ASCII Description
0 N No handshaking (default)
1 XON XON/XOFF software handshaking
2 CTS CTS/RTS hardware handshaking
Field
Field
Type ASCII
Value Binary
Value
Description
Binary
Format
Binary
Bytes
Binary
Offset
1 COM header - - This field contains the
command name or the
message header depending on
whether the command is
abbreviated ASCII, ASCII or
binary, respectively.
- H 0
2 port See Table 10, COM
Serial Port Identifiers
on Page 67
Port to configure.
(default = THISPORT)
Enum 4 H
3 bps/baud 300, 600, 900, 1200,
2400, 4800, 9600,
19200, 38400,
57600, 115200, or
230400
Communication baud rate
(bps).
Bauds of 460800 and 921600
are also available on COM1 of
OEMV-2-based products.
ULong 4 H+4
4 parity See Table 11, Parity
on Page 67
Parity Enum 4 H+8
5 databits 7 or 8 Number of data bits
(default = 8)
ULong 4 H+12
6 stopbits 1 or 2 Number of stop bits
(default = 1)
ULong 4 H+16
7 handshake See Table 12,
Handshaking on
Page 68
Handshaking Enum 4 H+20
8 echo OFF 0 No echo
(default)
Enum 4 H+24
ON 1 Transmit any input characters
as they are received
9 break OFF 0 Disable break detection Enum 4 H+28
ON 1 Enable break detection
(default)