Eizo CG243W - Manual (Page 25)

 Chapter 3 Setting Monitor
Chapter  Setting Monitor
-1. Enabling/Disabling Mode Selection [Mode Preset]
Allows you to select the specified modes only.
Use this function when all the display modes are not available or when keeping the display mode
unchanged.
Procedure
Choose <Tools> from the Adjustment menu, and press .
Choose <Mode Preset> from the <Tools> menu, and press
.
Select the mode to change its settings with
or , and press .
Select “On” or “Off” with
or .
Press to exit the adjustment.
Attention
You cannot set all the modes disable. Set at least one mode to “On”.
•
-. Locking Buttons [Key Lock]
This function allows you to lock to prevent changing the adjusted/set status.
Procedure
Press to turn off the monitor.
Press holding down for at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
Choose <Key Lock> from the <Optional Settings> menu, and press
.
Select “Off”, “Menu”, or “All” with
or , and press .
Settings Buttons that can be locked
Off (Initial settings) None (All buttons are enabled)
Menu button
All All buttons excluding
Select “Finish” with
or .
Press to exit.
The Optional Settings menu is closed.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.