2. setting power indicator [power indicator, Setting power indicator [power indicator]... 0, Setting monitor’s automatic brightness – Eizo CG243W User Manual
Page 30: Setting power indicator [power indicator
0
Chapter 4 Power Saving Function
-. Setting Power Indicator [Power Indicator]
The brightness of the power indicator (blue) when the screen is displayed can be adjusted (default setting
is set to light up when power is turned on, and brightness is set to 4).
Procedure
Choose <PowerManager> from the Adjustment menu, and press
.
Choose <Power Indicator> from the <PowerManager> menu, and press
.
Select the indicator brightness “Off” or in the range from 1 to 7 with
or
as desired.
Press
to exit the adjustment.
-. Setting Monitor’s Automatic Brightness Adjustment
[Auto EcoView]
The sensor on the lower side of the monitor detects the environmental brightness to adjust the screen
brightness automatically and comfortably by using the Auto EcoView function.
Attention
The Auto EcoView function is not available in CAL mode.
Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function.
•
•
Procedure
Choose <PowerManager> from the Adjustment menu, and press
.
Choose <Auto EcoView> from the <PowerManager> menu, and press
.
Select “On” or “Off” with
or
.
Press
to exit the adjustment.
1.
2.
3.
4.
1.
2.
3.
4.