Eizo CG243W - Manual (Page 7)

7 Chapter 1 Introduction
1-. Controls and Functions
Ex. CG243W
16
12
19
18
17
11 13 15
1 2 3 4 5 6 7 8 9 10 14
DVI-1 DVI-2 Disply-Port POWER INPUT
1 Sensor (AutoEcoView) Detects ambient brightness. Auto EcoView function

button
Switches input signals for display when more than two PCs are
connected to the monitor.

button
Allows you to switch the Color Mode.

button
Displays the information about monitor or input signals.

button
Adjusts the brightness.
6
button
Cancels the adjustment/setting or exit the adjustment menu.
7
buttons
Chooses an adjustment item or increases/decreases adjusted values
for advanced adjustments using the Adjustment menu.
8
button
Displays the Adjustment menu, determines an item on the menu screen,
and saves values adjusted.
9
button
Turns the power on or off.
10 Power indicator Indicates monitor’s operation status.
Blue : Operating
Flashing blue
(2 times for each)
: When the timer is set for ColorNavigator, notifies
that a recalibration is required (for CAL mode).
Orange : Power saving
Off : Power off
11 Main Power switch Turns the main power on or off.
1 Power connector Connects the power cord.
1 Input signal connectors Display Port Connector x 1
1 Input signal connectors DVI-I Connector x 2
1 USB port (Up) Connects the USB cable to use the software that needs USB
connection, or to use USB Hub function.
16 USB port (Down) Connects a peripheral USB dirive.
17 Stand
Used to adjust the height and angle of the monitor screen.
18 Security lock slot Complies with Kensington's MicroSaver security system.
19 Cable holder Covers the monitor cables.
Adjustment menu