Eizo CG243W - Manual (Page 37)

7 Chapter 6 Reference
6-. Making Use of USB (Universal Serial Bus)
This monitor has a hub compatible with USB. Connected to a PC compatible with USB or another USB
hub, this monitor functions as a USB hub allowing connection to peripheral USB devices.
●
Required System Environment
A PC equipped with a USB port or another USB hub connected to a USB compatible PC
Windows 2000/XP/Vista/7 or Mac OS 9.2.2 and Mac OS X 10.2 or later
EIZO USB cable (MD-C93)
Attention
This monitor may not work depending on PC, OS or peripheral devices to be used. For USB compatibility of
peripheral devices, contact their manufactures.
Devices connected to the USB port (upstream and downstream) work when the monitor is in power saving
mode or when the power button of the monitor is Off. Therefore, power consumption of the monitor varies with
connected devices even in the power saving mode.
When the main power switch is Off, device connected to the USB port will not operate.
•
•
•
●
Connection Procedure (Setup of USB Function)
Connect the monitor first to a PC using the signal cable, and run the PC.
Connect the supplied USB cable between the downstream USB port of a USB compatible PC (or
another USB hub) and the monitor’s upstream USB port.
The USB hub function is set up automatically upon connection of the USB cable.
Connect the peripheral USB device to the USB port (downstream) of the monitor.
Upstream
Downstream
1.
2.
3.
1.
2.
3.