NETGEAR 7300 Series - Manual (Page 106)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-40 Switching Commands
202-10009-01_060204
deleteport
This command deletes the port from the port-channel (LAG). The interface is a logical slot and
port number of a configured port-channel.
Format deleteport <logical slot/port>
Mode Interface Config
deleteport
This command deletes all configured ports from the port-channel (LAG). The interface is a logical
slot and port number of a configured port-channel.
Format deleteport <logical slot/port> all
Mode
Global Config
monitor session
This command configures a probe port and a monitored port for monitor session (port monitoring).
The first slot/port is the source monitored port and the second slot/port is the destination probe
port. If this command is executed while port monitoring is enabled, it will have the effect of
changing the probe and monitored port values.
Format monitor session source <slot/port> destination <slot/
port>
Mode Global Config
no monitor session
This command removes the monitor session (port monitoring) designation from both the source
probe port and the destination monitored port and removes the probe port from all VLANs. The
port must be manually re-added to any desired VLANs.
Format no monitor session
Mode
Global Config