Remote control features, E–12 – NEC LT150Z User Manual

Page 18

Advertising

E–12

4. LED

Flashes when any button is pressed.

5. Power ON Button

If the main power is applied, you can use this button to turn your
projector on.

6. Power OFF Button

If the main power is applied, you can use this button to turn your
projector off.

NOTE: To turn off the projector, press and hold the POWER OFF but-
ton for a minimum of two seconds.

7. VIDEO Button

Press this button to select an NTSC, PAL, SECAM or NTSC4.43
compatible video source from a VCR, DVD player, laser disc player
or document camera.

8. S-VIDEO Button

Press this button to select an S-Video source from a VCR.

9. RGB 1 Button

Press this button to select a video source from computer or compo-
nent equipment connected to your RGB port.

10. RGB 2 Button

Not available on this model.

11. AUTO ADJ Button

Use this button to adjust an RGB source for an optimal picture. Some
signals may not be displayed correctly or take time to switch be-
tween sources.

12. LASER Button

Press and hold this button to activate the laser pointer. When lit, you
can use the laser to draw your audience's attention to a red dot that
you can place on any object.

13. MENU Button

Displays the menu for various settings and adjustments.

14. SELECT (

▲▼

ᮤ

ᮣ

) (Mouse) Button

When you are in the Computer mode, these buttons work as a com-
puter mouse.
When you are in the Projector mode, which is indicated by lighting
the PJ button:
▲▼: Use these buttons to select the menu of the item you wish to

adjust.

ᮤ ᮣ

: Use these buttons to change the level of a selected menu item.

A press of the

ᮣ

button executes the selection.

When the pointer is displayed, these ▲▼

ᮤ ᮣ

buttons move

the pointer.

15. ENTER (Left Click) Button

When you are in the Computer mode, this button works as the mouse
left button.
When this button is pressed and held for a minimum of 1.5 seconds,
the drag mode is set.
When you are in the Projector mode, which is indicated by lighting
the PJ button:
Use this button to enter your menu selection. It works the same way
as the "Enter" button on the cabinet.

FOCUS

ZOOM

VOL.

SHIFT

HELP

INTE

KEYSTONE

IFY

PIC-M

UTE

SLIDE

IDE

LIST

OFF

VIDEO

AUTO ADJ.

S-VIDEO

RGB1

RGB2

LASER

POWER

SELECT

Remote Control Features

NOTE: If you are using a Macintosh computer, you can click either the
right-click or left-click button to activate the mouse.

NOTE: If any one of the buttons is pressed and held for 60 seconds or
more, the button operations will cease to operate. This is not a mal-
function, rather it is a feature used to prolong battery power. To cancel
this feature, press any one of the buttons other than the SELECT but-
ton.

1. Infrared Transmitter

Direct the remote control toward the remote sensor on the projector
cabinet.

2. Laser Pointer

Beams a laser light when "Laser" button is pressed.

3. Remote Jack