NEC LT150Z - Manual (Page 36)

E–30
Using a USB Mouse
Using a USB mouse gives you a smooth operation. A commercially
available USB mouse is required.
NOTE:There may be some brands of USB mouse that the projector does not
support.
Operate the Menus using the USB mouse
Mouse Cursor
When connecting a USB mouse to the projector, you get a mouse
cursor on the screen.
Unless you use your USB mouse within 10 seconds, the mouse
cursor disappears.
Menu Display
Clicking with a mouse button displays the menu.
Clicking displays the pull-down menu.
To close the menu, click anywhere in the background.
Adjusting and Setting Display
You can select a menu item and click with a mouse button to
make adjustments and setting.
Examples
Click (or press and hold) the mouse button ᮤ or ᮣ to adjust the
brightness.
Or click and drag the mouse button on the slide bar horizontally
to adjust it.
To save the adjustments, click . The display is closed.
If you click anywhere in the background while displaying ad-
justment and setting menu or dialog box, you will get the main
menu at the clicking point.
An item “To Advanced Menu” will be
added to the bottom of the Basic/Cus-
tom Menu.
Selecting this item and pressing the “En-
ter” button will display the “Advanced
Menu” features.
NOTE: If the “Advanced Menu” item has been selected on the Menu mode, you
get the “Confirmation Change Menu” upon completion of “Basic/Custom Menu”
editing. In this case, selecting “Yes” then “Enter” will close all the menus and
apply the changes from the Advanced menu to the Basic/Custom Menu.
If you select “No” then “Enter” functions, then all menu items will return to
the Advanced menu, but your changes will still be available within the “Ba-
sic/Custom Menu” selection. To display the previously tailored Basic/Cus-
tom Menu, select “Basic/Custom Menu” from the “Menu Mode”.