NEC LT150Z - Manual (Page 51)

E–45
SLIDE
When the tool bar is not displayed:
Press the FOLDER LIST button on the remote control to display
folders from a CompactFlash card in the projector’s PC Card slot.
Use the SLIDE +/- button to
advance to the next folder or
return to the previous folder.
Folder
02 : 0001 / 0008
Folder Folder Folder
Folder
Slide Slide Slide Slide
Slide Slide Slide Slide
02 : 0004 / 0008
Slide
Slide(Table) cursor
(green marks)
Use the SLIDE +/- button to
advance to the next slide or re-
turn to the previous slide.
Auto Play Mode
• If the “Auto Play” option is selected in “PC Card Viewer Op-
tions” of the menu, any given slide will start to play automati-
cally. You can also specify Auto Play Interval between 5 and
300 seconds.
Switching to Slides Directly from Other Input Modes
With this function it is possible to switch directly to a slide when the
picture of a VCR or computer is being projected.
Example:
When conducting presentations using a combination of slides and
moving pictures from a VCR, etc., it is possible to switch from a PC
Card Viewer slide to the video picture then back to the PC Card
Viewer slide simply by using a source button and PC CARD button.
NOTE: Even if you switch the current PC Card Viewer source to an-
other source, the current slide is retained. When you return back to
the PC Card Viewer, you will get the slide that has been retained.
Folder
Lit red
Works as the Select button on
the projector.
Multi cursor (blue marks)
NOTE: You can also use the
ᮤ
and
ᮣ
button on the remote control to select
folders or slides.
If you use the
ᮤ
and
ᮣ
button on the remote control for PC Card Viewer
operation, press the PJ button to switch to the Projector mode and the PJ
button lights red.
Current folder number
Current slide number Number of all slides
in folder
MENU
E
N
TE
R
CA
NC
E
L
PJ
FOCUS ZOOM
OFF
VIDEO
AUTO ADJ.
S-VIDEO RGB1 RGB2
LASER
ON
VOLUME
SHIFT
HELP POINTER
KEYSTONE MAGNIFY
FREEZE
PIC-MUTE
PC CARD
SLIDE
FOLDER
SLIDE
LIST
SELECT
POWER
E
N
TE
R
CA
NC
E
L
FOCUS ZOOM SHIFT
SELECT
PJ
NOTE: The PC card editing operation cannot be performed from the
projector. Do so using the PC Card Viewer software.