NEC C944 - Manual (Page 30)

28
Quick Call
Activate an entry in the telephone book and then select
Quick Call from the Options menu. Key in a one-digit num-
ber from 1 to 9 as your quick call number and confirm your
selection by pressing
OK .
Note: quick call numbers can only be allocated once. To dial a
number, press the key you have allocated the number to and
hold it down for a second or two while the handset is idle. The
number you wish to call will then be entered automatically in
pre-dial mode or is dialed immediately (depends on settings in
the menu “Telephone Option/Auto Quick Hook“). In the tele-
phone book the names allocated to the quick call function have
the corresponding quick call number in front of the names.
Removing a quick call number can only be performed by
assigning a new quick call number to the telephone book entry
in question without giving it any number. To delete the quick
call number use
C
.
Transferring
Phone
Numbers to
the Telephone
Book
Every selectable phone number in the ”caller list” or ”redial list”
can be transferred to the telephone book. To do so, the
Options softkey in the Caller list Menu or Redial List Menu is
available for this purpose, depending on the state of the hand-
set. If
OK is pressed, the phone number is stored immediately
and is treated as a new entry:
Options Add To OK Telephone Book OK
F Edit number / enter name OK
Edit number press OK and enter/edit a name for the phone
number. Confirm by pressing OK . It is not possible to store a
phone number without an associated name.
When entering characters and numbers, the arrow keys can be
used to shift the entry position to the left or right.
The Esc softkey cancels the entry.