NEC C944 - Manual (Page 41)

39
20 Menu: System
Registration
Code
The handset can be operated with a maximum of 10 DECT
systems. Before you can make a call via the DECT system, the
handset has to be registered to the respective system. A sys-
tem ID and registration code may be necessary for the registra-
tion process. Ask the respective system administrator for the
valid registration code. When the handset is not yet subscribed
to the system the display is showing ”No subscription”.
All settings in this chapter are started by pressing the softkeys:
Menu System OK
Then select…
Registering the
Handset to the
DECT System
Subscription OK Options New / OK F PARK
OK F PIN (Authentication code) OK F System name OK
F Local phone number OK
The following entries must be made when logging on:
Selecting the
DECT System
Subscription OK select a System Options
Select OK
If the handset has been registered to several DECT systems,
then you can select which one the handset is to use. Select the
system via the arrow keys before confirming ”Select”. By
choosing
Options Select , the function automatic search is
disabled. The selected system is shown in the idle display.
Enter PARK : a system ID should only be entered
if you are at a location where two
DECT systems overlap. If only one
DECT system is available, then just
press
OK .
Enter Auth.Code : this code is used to register the
handset (authentication code). The
DECT System supplies this code.
Enter System Name : give the name of the DECT system
to which you are registering. This
will be shown on the idle display.
For information concerning the
entry of characters, refer to ”Enter-
ing Characters / Names”.
Enter Local Number : the phone number, assigned to
your DECT handset can be entered
here (ask your system administra-
tor for the phone number).