NEC C944 - Manual (Page 43)

41
21 Menu: Telephone Options
All entries in this chapter are started by pressing the softkeys:
Menu Telephone Option OK
Then select…
Alarm
The C944 allows you to set a time between 00:00 and 23:59 at
which the handset will emit an acoustic signal (preset tone for
internal calls). The signal lasts 60 seconds and can be
switched off by pressing any key. Powering the handset On/Off
doesn´t affect the Alarm Setting.
The Alarm time can only be set when date and time are avail-
able on the handset.
*
When the Alarm goes off, ”Alarm” is shown on the display.
No Alarm will be given, when the handset has been switched
to ”OFF”.
Setting the Alarm
Clock
Alarm OK Set OK F time 00:00 - 23:59 OK
Activating/
Deactivating the
Alarm Clock
Alarm OK Active OK
Once you have set an alarm time, you can activate it by press-
ing
OK , in which case the ”“” appears. Press OK again to deacti-
vate it.
Note: When the Alarm Clock is active, the Alarm symbol is dis-
played behind the time on the display when the handset is idle.
User Name
User Name OK F Name OK
This function can be used to store the name of the telephone
user. The user name consists of maximum 16 characters. The
name is shown on the idle display. Further information con-
cerning the input of characters can be found at ”Entering char-
acters / names”.
Changing the
Language
Language OK English OK
Sets the desired display language. It is possible to select from
12 different languages.
* Only useable when supported by your telephone system.