NEC C944 - Manual (Page 5)

3
1 Important Safety Information
Only use this product in countries where the appropriate
authorities have given their authorisation.
Sensitive
Electronic
Environment
Any radio-based equipment can potentially cause interference
with other equipment and can be interfered from other equip-
ment. This also applies for DECT equipment. However due to
the very low transmission power level the chan
ces for interfer-
ence are very small. Research proves that operational DECT
phones normally don't influence electronic equipment however
some precautions must be taken into account for sensitive
electronic equipment e.g. sensitive laboratory equipment.
When DECT phones operate in
close proximity to sensitive
electronic equipment incidental influence can
occur. You are
advised not to place the DECT phone on or close (less then
10cm) to this kind of equipment, even in standby mode.
Please also use the other documentation supplied with the var-
ious parts of your telephone system.
Power Supply
The mains voltage of the adapter should match the local mains
voltage,
The A9 symbol on the product certifies its conformity with the
Australian technical requirements concerning user safety and
electro-magnetic compatibility valid at the time of approval.
of 240V AC.