NEC C944 - Manual (Page 8)

6
Note: if the batteries are inserted incorrectly, the handset will
not function, and may be damaged.
Installing the
Charger
To operate the charger a mains connection is required.
Closing the battery compartment cover:
Replace the cover by placing it
on the compartment at a slight
angle (1) and pressing it down
until it clicks into place (2).
Check if the mains voltage
does match the adapter mains
voltage.
Connect the cable on the
plug-in AC adapter to the ter-
minal on the bottom of the
charger and plug the AC
adapter into the mains socket-
outlet.
Mains plug