NEC 110 - Manual (Page 26)

2-2 Using the MH 110 Wireless Telephone
Mobile Handset 110 Wireless Telephone and Desktop Charger User Guide - Revision 1
Turning the Wireless Telephone On or Off
Use the following steps to turn on your MH 110 Wireless Telephone.
Step 1 Press and hold the Power On/Start Call key for about one second. Two
chirps will sound.
Step 2 Release the Power On/Start Call key and the in-service tone sounds as
the extension number displays.
The Wireless Telephone is now in standby mode and ready to make and
receive calls.
Use the following step to turn off your MH 110 Wireless Telephone.
Step While in standby mode, press and hold the Power Off/End Call key. One
chirp sounds and the Wireless Telephone turns off.
Making a Call
Use the following steps to make calls.
Step 1 Go Off Hook by pressing the Power On/Start Call key.
Step 2 Press the LINE key to select a line and the number key of the line you
wish to use. You may hear a dial tone.
Step 3 Dial the number.
NOTE
The Wireless Telephone cannot be turned off during a call. End the call first and then
turn the Wireless Telephone off.
NOTE
Your telephone system may require you to select a line before dialing a number.
NOTE
Dial calls with the Wireless Telephone exactly as with your desk phone. You may dial
extension numbers, internal numbers, or make external calls, depending on the
setup of your PBX. If you hear a dial tone, just press the number keys to dial the
number.