NEC 110 - Manual (Page 33)

Using the MH 110 Wireless Telephone 2-9
Mobile Handset 110 Wireless Telephone and Desktop Charger User Guide - Revision 1
Table 2-5 User Option Menu Commands
Battery Packs
The Wireless Telephone’s Battery Pack must be recharged periodically.
The Nickel Metal Hydride (NiMH) rechargeable Wireless Telephone
Battery Pack gives you four hours of talk time or 80 hours of stand-by
time.
Commands Descriptions Actions
Ring Type Select Telephone Ring to set
the standard ring on the
Wireless Telephone.
• Normal: is the factory default
ring.
• Vib/Norm ring: vibrates for
five seconds and then rings.
• Vibrate ring: vibrates for a
non-audible call alert.
Press 0 to select desired ring
type. The ring type currently set
displays with an asterisk.
Noise Mode Adjusts the Wireless
Telephone to account for
background noise.
• Normal: for most office
environments
• High: for moderate
background noise
• Severe: for extremely noisy
conditions.
Select an option that describes
the noise in your environment.
Current IP address In IP systems, the IP address
of the Wireless Telephone is
displayed. This number may
not be edited.
None.
Extension Sets the extension number
associated with your Wireless
Telephone. This number is
used to identify the Wireless
Telephone and is for display
purposes only.
Use keypad to enter extension
number.
NOTE
Additional options may be present. Contact your system administrator for
information.
NOTE
Stand-by time is when the phone is turned on, but not in an active call.