NEC 110 - Manual (Page 29)

Using the MH 110 Wireless Telephone 2-5
Mobile Handset 110 Wireless Telephone and Desktop Charger User Guide - Revision 1
Step Scroll to the option and press Select.
Step Press MENU + 2 to activate the Transfer feature if you are not already
scrolling through the shortcut menu.
Using the Softkeys
The softkeys on your MH110 Wireless Telephone enable you to quickly
activate system features. There are four softkeys and up to 16 features
programmed for softkey access.
The display area directly above each softkey is programmed with a
feature abbreviation to guide your access to the feature. The softkeys
are referred to from left to right as A,B,C,D. In Figure 2-2 the
corresponding display area is labeled Aaaa, Bbbb, Cccc, Dddd.
Figure 2-2 MH110 Wireless Telephone—display area highlighted
The softkeys operate with a toggle function. Press the left or right side
of the key to activate the corresponding softkey feature.
The first four primary softkey features are displayed in the softkey
function display area by default. Use the following steps to view all of
the features that can be activated through the softkeys.
Step 1 Briefly press the Power On/Start Call key to go off hook.
NOTE
In certain system environments, the softkeys and the MENU key are unavailable. In
such environments, press the FCN key while off hook to scroll through system
features. Press the shortcut key to activate the feature.
Earpiece
Right arrow
Voicemail icon
Display area
Shortcut Menu &
Main display area
Softkey Function
display area
Softkey D
Softkey C
Power Off
End Call
Menu
Line
Microphone
Headset jack
Charging contacts
Function
Power On
Start Call
Softkey B
Softkey A
Down
Select
Up
Low battery
icon
Left arrow
Line indicators
Line