NEC 110 - Manual (Page 30)

2-6 Using the MH 110 Wireless Telephone
Mobile Handset 110 Wireless Telephone and Desktop Charger User Guide - Revision 1
Step 2 Press the FCN key. The second set of feature abbreviations displays in
the softkey display area
(Figure 2-2) .
—Each time the FCN key is pressed, a different set of features displays
until all 16 possible features have been displayed.
—The softkey features display in the same sequence as they appear on
the shortcut menu.
Step 3 Press the corresponding softkey to activate any feature while its
abbreviation is displayed.
Activating Features With The Shortcut keys
While scrolling through the softkey functions, a shortcut key may be
pressed to activate its corresponding feature, whether or not that
feature is currently displayed in the softkey function display area.
Because system features vary, your system administrator will explain
them in reference to your telephone system.
Example: Using the previous example for the Transfer function
described on page 2-4 : If the Transfer function is assigned to
softkey A in the second level row, then Xfr displays in the
Aaaa softkey display area when the FCN key is pressed.
If a call is in progress, do one of the following to activate the Transfer
feature:
• Press FCN + (softkey A) to transfer the call.
• Press FCN + 2 to use the shortcut key.
• Press MENU + 2.
Status Indicators
Table 2-3 describes the status indicators in the MH 110 Wireless
Telephone.
REFERENCE
Refer to the example of using the shortcut keys on page 2-4 for more information
about using MENU + 2.