NEC MOBILEPRO 900 - Manual (Page 24)

1-16 Getting Started
Connecting the USB PC Connect Cable
Before installing Microsoft ActiveSync, use the following procedure to
connect the USB PC Connect cable to both your MobilePro and to
your host PC.
1. Locate and open the USB connector cover on the right side of
your MobilePro.
2. Align and attach the smaller cable end of the USB PC Connect
cable to the “slave” USB port on the MobilePro.
Locating the slave USB port
A – MobilePro Slave USB Port
3. Connect the other end of the cable to a USB port on your host PC.
Continue to the next section to install Microsoft ActiveSync.
Installing Microsoft ActiveSync
You must install Microsoft ActiveSync on your host PC to enable
synchronization with your MobilePro. The Microsoft ActiveSync 3.1
CD that ships with your MobilePro contains the ActiveSync software
designed for synchronization with Microsoft Office components. The
following procedure assumes Microsoft Outlook
®
as the host PC
synchronization component.