NEC MOBILEPRO 900 - Manual (Page 37)

Getting Started 1-29
Configuring a Network Connection
If your host PC is connected to a network, configure one of the
following components before installing Microsoft ActiveSync:
! Configure a WINS server on the host PC’s network, or,
! Configure the host PC’s IP address on the MobilePro using the
following procedure:
1. Tap Start, Settings, Control Panel, and double tap the network
icon.
2. Highlight NE2000 Compatible Ethernet Driver and select the
Properties button.
3. In the IP address tab, select (place a dot beside) “Obtain an IP
address via DHCP.”
4. Select the Name Servers tab and enter the host PC’s IP address in
the “Primary WINS” field.
To identify the host PC’s IP address, run an IP config utility. In
Windows 95, 98, 2000, and XP, run Win IP Config. In Windows
NT, run IP Config. If you need assistance, see your network
administrator.
Installing ActiveSync
Follow these steps to install Microsoft ActiveSync for synchronization
with Microsoft Outlook. The installation sequence may vary depending
upon the Microsoft components installed on your host PC.
Note If your host PC uses the Windows NT operating system, you
must install Windows NT Networking before installing Microsoft
ActiveSync on your host PC.
1. Insert the Microsoft ActiveSync 3.1 CD in the CD-ROM reader of
your host PC.