NEC MOBILEPRO 900 - Manual (Page 53)

Introducing the MobilePro 2-9
Using the Stylus
To use the stylus, follow these steps:
1. Open the MobilePro display panel.
2. Locate the stylus holder on the lower right side of the display
panel (see “Around the Front of the System” earlier in this
chapter). To remove the stylus, slide it away from the unit.
MobilePro 900 Stylus
Although you can use your fingertip to activate
the touch screen, never use hard-pointed or sharp objects. These
objects can damage the touch screen.
Never use a ball-point pen on the touch screen.
The MobilePro 900 warranty does not cover damage to the touch
screen caused by a ball-point pen or other sharp objects.
3. Gently touch the pointed tip of the stylus to the screen to select an
object. You can touch, tap, or double tap objects on the MobilePro
touch screen.
Note The touch, tap, and double tap act just like a point, click, and
double click of a mouse.
See “Using Windows H/PC” in Chapter 3 of this guide for additional
information about using the stylus.
4. When you are done using the stylus, return it to its convenient
holder in the MobilePro.