NEC MOBILEPRO 900 - Manual (Page 99)

Setting Up a Remote Connection 5-7
! Enter RAS (Exchange server) information as follows:
— Either POP3 Host or Server (for IMAP4 mail) — ISP
host/server name
— User ID — Domain\your user id\exchange alias
— Password — Your password, if required
— SMTP Host — Exchange server name
— Return Address — Your e-mail address (if in a UNIX
environment <your e-mail address>)
Note If you experience difficulty sending e-mail, check your optional
configuration settings. If you experience difficulty receiving e-mail,
check your required configuration settings.
Activating a Connection
Once you create a new connection for each desired service, activate the
connection with that service to open communication and send or
receive e-mail.
Follow these steps to activate a connection.
1. Double tap the Inbox icon.
2. Tap Services and verify that the service you want to connect is
selected.
The currently selected service displays in the dropdown box and is
designated with a dot. If necessary, modify your selection before
connecting and tap OK.
3. Tap Services (again, if necessary) and tap Connect.
The connection dialog box displays and may prompt you to enter a
password. Otherwise, the connection dialog box displays the
connection progress and indicates when the connection is
successful.
4. Enter your password, if required.
Once the connection is established, you are ready to send and
receive e-mail.