Call control for 1tr6 (old german isdn), Control of outgoing service indicator, Call control for 1tr6 (old german isdn) -5 – NETGEAR XM128 ISDN User Manual
Page 73: Control of outgoing service indicator -5
Reference Guide for the Model XM128 ISDN Digital Modem
Advanced ISDN
7-5
Call Control for 1TR6 (Old German ISDN)
In order to initiate a 1TR6 ISDN call, two information elements are necessary:
•
Service indicator, which determines what kind of bearer services are desired.
•
Destination address, which provides necessary information for the telephone company central
office to direct the call to the remote party.
Control of Outgoing Service Indicator
The outgoing service indicator is assigned when you configure the B channel protocols using the
command ATBnn.
Because there are a number of combinations of voice or voice-band-data services on the analog
adapters, users may want to control the outgoing service indicator themselves for some specific
applications.
The following information is recommended to configure S104/S107 (service indicator) and S108/
S111 (additional information octet) according to the terminal types:
•
Service indicator
•
S107: analog, PHONE 1
•
S104: analog, PHONE 2 Addi. S. I.
•
S111: analog, PHONE 1
•
S108: analog, PHONE 2
•
Telephone1 (Fernsprechen)1 (3.1 KHz)
•
Modem2 (analog - dienste)3 (Daten Über Modem)
•
4 (Btx Über Modem)
•
G3 Fax3 (analog - dienste)2 (Fax Gruppe 3)