NETGEAR XM128 ISDN - Manual (Page 80)

Reference Guide for the Model XM128 ISDN Digital Modem
7-12 Advanced ISDN
Nn is the identifier of the numbering plan for the ATDx command:
• N0 for unknown (default if Nn is omitted)
• N1 for ISDN numbering plan (Rec. E.164)
• N3 for data numbering plan (Rec. X.121)
• N4 for telex numbering plan (Rec. F.69)
• N8 for national standard numbering plan
• N9 for private numbering plan
Zn specifies the type of the subaddress:
• Z0 for NSAP (Rec. X.213) with AFI=0x50, IA5 characters (default if Zn is omitted)
• Z2 for user specified, IA5 characters
The called-party number or an appropriate part of it is sent to the addressed entity. The called-party
subaddress is transferred transparently by the ISDN network to the destination.
Use ATDL to redial the last dialed telephone number (and/or subaddress).
Placing a Call for 1TR6
The ATDx[Yn][Nn]destination_address command is used for dialing as follows:
x = I (ISDN data), A (the analog adapter 1), or B (the analog adapter 2)
Yn specifies the type of address:
• Y0 for unknown (default if Yn is omitted)
• Y1 for international number
• Y2 for national number
Nn is the identifier of numbering/addressing plan:
• N0 for unknown (default if Nn is omitted)
• N1 for ISDN numbering plan (Rec. E.164)
The destination address is the ISDN phone number of the called party. The last digit of this number
is the EAZ. Use ATDL to redial the last dialed ISDN phone number.