NETGEAR XM128 ISDN - Manual (Page 84)

Reference Guide for the Model XM128 ISDN Digital Modem
8-2 Analog Call Handling
AT Commands for Analog Calls
Table 8-1 lists some of the most frequently used AT commands.
Table 8-2 lists the AT commands that are specific to European switches.
Table 8-1. Frequently used AT commands
AT Command Description of command
ATDAs Automatically dials out for device connected to PHONE 1.
The number string to dial is represented by the letter s.
ATDBs Automatically dials out for device connected to PHONE 2.
AT&V6 View current setting of analog adapter, PHONE 1.
AT&V7 View current setting of analog adapter, PHONE 2.
AT&L0
orATS84.5=0 Assign analog calls to PHONE 1 if the line is not in use.
AT&L1
orATS84.5=1 Assign analog calls to PHONE 2 if the line is not in use.
AT&ZIn=s MSN setting, assign called phone number, s, to be answered by n port
(where n=6 for PHONE 1 and n=7 for PHONE 2).
AT&ZI6=s Assign the called phone number for analog adapter, PHONE 1.
AT&ZI7=s Assign the called phone number for analog adapter, PHONE 2.
ATS56=n Flash timer, in 100 ms unit, to set maximum duration of on/off hook
transition to be recognized as flash.
Table 8-2. Frequently used AT commands (European switches)
AT Command Description of command
ATS89.6=0 To disable the metering pulse for analog adapter, PHONE 1
ATS89.6=1 To enable the metering pulse for analog adapter, PHONE 1
ATS89.5=0 To disable the metering pulse for analog adapter, PHONE 2
ATS89.5=1 To enable the metering pulse for analog adapter, PHONE 2