Niles Audio RVL-6 - Manual (Page 3)

Introduction
The RVL-6 is a modular multi-room control system. It combines the benefits of a remote controlled speaker selection/vol-
ume control/infrared repeater system into one low-profile chassis. The RVL-6’s unique modular design enables you to
design your system to suit your needs. Each RVL-6 can be configured for up to six rooms, and four RVL-6s can be linked
in a single system to control up to 24 rooms. Each room is assigned an insertable room control module (sold separate-
ly). Choose between a volume control module (includes room on/off control) and a basic room on/off module. You pur-
chase only the room control modules required for your system.
The RVL-6 can be integrated with Niles keypads, programmable IR keypads (the Niles IntelliPad ™ ), IR sensors and pow-
erline carrier controls to deliver the optimum level of control for each room. Additionally, the RVL-6 interfaces with Niles
automation products for total convenience.
You’ll never have to worry about overloading an amplifier powering an RVL-6. The RVL-6 constantly monitors which
speakers are playing and selects exactly the right amount of impedance protection for your amplifier.
Figure 1 The RVL-6 Multi-Room Controller
3 3