NISSAN 40053 - Manual (Page 10)

10 ‘04-’09 Nissan Titan - Kit 40053
b. Remove bolt and wiring harness bracket from
frame.
c. Remove two wiring harness push clips and wir-
ing harness from frame / body mount perch.
Rear of Vehicle
1. Fuel filler
a. Remove bolt and fuel filler bracket from bed.
WARNING
Use extreme caution when working near fuel lines and
fuel tank. Clean up spilled fuel immediately. A spark
could cause an explosion or fire resulting in serious
personal injury and property damage.
Bolt
Wiring Har-
ness Bracket
Frame
Push Clips
Wiring
Harness
Body Mount
Perch
Bolt
Fuel Filler
Bracket
Bed
b. Remove fuel cap from fuel filler. Push fuel filler
rubber gasket and fuel filler toward inside of bed.
2. Spare tire cranking mechanism
a. Lower the spare tire according to the manufac-
turers specifications.
b. Remove three push clips and plastic housing
from frame cross member.
c. Remove two bolts and spare tire winch mecha-
nism from frame cross member.
3. Rear bumper wiring driver side
a. Remove wiring harness and clip from bumper.
Fuel Cap
Fuel Filler
Rubber
Gasket
Plastic Housing
Cross
Member
Winch
Mechanism
Bolts
Push Clips
Wiring Har-
ness & Clip
Bumper