NISSAN 40053 - Manual (Page 17)

17 ‘04-’09 Nissan Titan - Kit 40053
3. Side step passenger side
a. Install side step on three side step brackets with
six bolts.
4. Frame rail passenger side
a. Enlarge hole in wiring harness bracket too 1/4”.
Install kit bracket, L-shaped on wiring harness
bracket with kit bolt (1/4” x 1”), two kit washers
(1/4” SAE), and a kit nut (1/4” nylock).
NOTE
It maybe necessary to slightly bend tab on the back
side of wiring harness bracket to fit over the top of the
frame.
Bolt
Side Step Brackets
Side Step
Hole
Wiring Harness
Bracket
Wiring
Harness
Bracket
Kit Bracket,
L-shaped
Kit Bolt (1/4” X 1”),
Kit Washers (1/4” SAE),
& Kit Nut Nylock (1/4”)
b. Install wiring harness bracket and kit bracket, L-
shaped on frame with bolt.
c. Install plastic cover on wiring harness bracket.
d. Install two wiring harness push clips and wiring
harness on top of frame / body mount perch.
5. Fuel lines at the fire wall
a. Install kit bracket, S-shaped on the engine side
of the fuel / brake line bracket with a kit washer
(1/4” SAE) and kit nut (1/4” nylock) as shown.
Wiring
Harness
Bracket
Kit Bracket
L-shaped
Bolt
Harness
Push Clips
Plastic
Cover
Kit Bracket,
S-shaped
Fuel / Brake
Line Bracket
Kit Washer
(1/4” SAE),
Kit Nut
(1/4” Nylock)
Engine Side