NISSAN 40053 - Manual (Page 26)

26 ‘04-’09 Nissan Titan - Kit 40053
o. Install grill on core support and vehicle with eight
grill turn clips.
p. If equipped, install two tow hooks on frame with
four bolts.
q. If equipped, install two wiring harness connec-
tors on running lights.
5. XE models: Front bumper
a. Install two side impact braces on two kit brack-
ets, side impact with four kit bolts (3/8” x 1”),
eight kit washers (3/8” USS), and four kit nuts
(3/8” nylock).
Grill
Grill Turn
Clips
Core Support
Tow Hooks
Bolts
Frame
Running
Lights
Wiring
Harness
Connector
b. Install two kit brackets, side impact on frame
with four bolts.
c. Mark and cut two side bumper braces as shown.
d. Install two side bumper braces onto front
bumper with two bolts, two kit blocks, 2” diame-
ter, two kit bolts (8-1.25 x 90mm), and two kit
washers (8mm).
Kit Bracket,
Side Impact
Bolt
Side Impact Braces
Kit Bolt (3/8” x 1”), Kit
Washer (3/8” USS), & Kit
Nut (3/8” Nylock)
Frame
Side
Bumper
Brace
Cut
Kit Bolt,
(8-1.25 x
90mm),
Kit Washer
(8mm)
Kit Block,
2” Dia.
Side
Bumper
Brace
Bolt