NISSAN 40053 - Manual (Page 2)

2 ‘04-’09 Nissan Titan - Kit 40053
Before Starting Installation
1. Carefully read all warnings and instructions com-
pletely before beginning.
2. Verify all parts have been received in this kit by
checking the parts list at the end of this document.
3. Only install this kit on the vehicle for which it is
specified. If anytime during the installation you
encounter something different from what is outlined
in the instructions, call technical support at (928)
636-7080.
4. Special tools needed:
a. Die grinder or similar tool capable of cutting
metal
b. Welder or access to a professional welding
shop.
5. Park the vehicle on a clean, dry, flat, level surface
and block the tires so the vehicle cannot roll in either
direction.
NOTE
Kit parts are prefaced by the word kit and appear in
bold print.
NOTE
If parts are missing from kit, please be prepared to pro-
vide the following information:
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
5. Inspector # from inside box cover
Engine Compartment
1. Battery cables
a. Disconnect both battery cables. Disconnect neg-
ative cable first, then positive cable.
Measurements
1. Measure and record distance between front bumper
and fenders.
Driver Side _____Passenger Side _____
2. Measure and record distance between rear bumper
and bed.
Driver Side _____Passenger Side _____
3. Measure and record distance between cab and bed.
Driver Side _____Passenger Side _____
Inside Cab
1. Airbag fuse
a. Remove fuse cover.
NOTE
The location of the airbag fuse may vary; check the
owner's manual.
Negative
Cable
Positive
Cable
Battery