NEC LT75Z - Manual (Page 28)

E-28
Lamp Mode
Lamp Mode
Normal Eco
This feature enables you to select two brightness mode of the
lamp:
Normal and Eco modes. The lamp life can be extended up to
1500 hours by using the Eco mode.
Normal Mode .............. This is the default setting.
Eco Mode .................... Select this mode to increase the lamp life.
NOTE: If you have selected the Eco mode, the lamp lights in Normal
mode for one minute after the projector is turned on. After one minute
the lamp will change to Eco mode.
Advanced Options (Advanced mode)
Aspect Ratio
Position/Clock
Resolution
Video Filter
Aspect Ratio:
Aspect Ratio
Normal Zoom Cinema Wide Zoom
Aspect Ratio allows you to select the best Aspect mode to
display your source image. You can also display the Aspect
Ratio window by pressing the “Aspect” button on the re-
mote control. (See page E-12).
When 4:3 is selected from the source (i.e. DVD player), the
following selections will display:
NOTE: You can select three image positions for Cinema: Top, center,
and bottom. See page E-31 for setting Cinema position.
NOTE: Once the Aspect setting has been changed, the “Resolution”
setting is automatically changed to “Auto”.
When 16:9 is selected from the source (i.e. DVD player),
the following selections will display:
Normal Zoom Wide Zoom Cinema
Standard
4:3 Aspect
All 4 sides
stretched
Left & Right
stretched
Left and right
stretched
Normal Zoom Wide Zoom Cinema
16:9 image
displayed
in 4:3 mode
All 4 sides
stretched
Left & right
stretched
Left and right
stretched to
display the true
aspect
Allows for adjustments of image position and stability.
When you select Advanced Options in Advanced mode, the
following options are available: Aspect Ratio, Position/Clock,
Resolution, and Video Filter.