Rackmount Solutions XRT Series - Manual (Page 20)

19
If the unit is being powered from the AC line, the percentage of actual
load power available will be shown by the “ON-LINE xxx% Load”
message. Otherwise, if the unit is being powered from the battery,
“BACKUP xx.xV BAT” message is displayed. In either case, you may
press the button under the “MENU” selection to step to the STATUS
menu.
Menu Flow
Note: The “road-map” through the menu system is shown below. In each
individual menu, pressing the “menu” button will take you to the next set
of menus.
The Mode Display will be shown after the unit’s first power up diagnostics
have been run, or when it is selected by stepping through the menu
selections.
ONLINE 50% Load
Menu
BACKUP 52.3V
Bat
Status Menu
Menu
Scroll
Test Menu
Menu Scroll
Menu Selection Sequence
Setup Menu
Menu Scroll
Config Menu
Menu Scroll