Roberts-Gordon HE15UT - Manual (Page 54)

B LACKHEAT ® HE I NSTALLATION O PERATION AND S ERVICE M ANUAL
48 of 73
10.7 Wall Mounting
Install wall mounting brackets at the height shown in the
layout drawing provided by the estimator. Space wall
mounting brackets and hangers as indicated by
dimensions d, e and f in the relevant Layout Overview
drawing for your heater. For Linear heaters see Page 15,
Figure 19, for Double Linear heaters see Page 18, Figure
21 and for u-tube heaters see Page 28, Figure 23.
10.7.1 Hardware Installation
The wall mounting brackets must be attached to a
suitable wall through all mounting holes. Screw sizes less
than M8 (5/16") may not be used. In order for the wall
mounting brackets to adequately carry the weight of the
heater, it must be installed with best building practice.
Figure 26: U-tube (Horizontal)
Figure 27: U-tube (Angle Mounted) Figure 28: Linear
Model
Quantity of Wall
Mounting Brackets
Model
Quantity of Wall
Mounting Brackets
HE15UT 2 HE15ST 3
HE20UT 3 HE20ST 4
HE25UT 3 HE25ST 4
HE30UT 3 HE30ST 5
HE35UT 3 HE35ST 5
HE40UT 3 HE40ST 5
HE45UT 4 HE45ST 6
HE50UT 4 HE50ST 6
Burner must
be below fan