Ringdale Gigabit - Manual (Page 21)

100-398-01 13
Reading s
tat
us
Chapter 3
Reading status indicators
The Smart Ringswitch Gigabit Module indicates status information on its LEDs and displays information on
its LCD. Alternatively, view the LEDs and LCD display from the management station, by running TrueView
Ringswitch Manager. For more information on how to run the TrueView Ringswitch Manager, refer to the
booklet accompanying the Smart Ringswitch Software CD.
Also refer to the Smart Ringswitch Family User Guide (part number 100-291) for more information about
Ringswitch LEDs.
Reading Gigabit Module port LEDs
The Gigabit Module port has two LEDs that indicate the status and mode. The upper LED displays the
information in Table 3.1.
The lower LED is either yellow or off, depending whether the Gigabit port is open or closed.
Table 3.1 Upper LED states for Gigabit Module ports
LED state Description
yellow The Gigabit port is enabled but the link is down
green The Gigabit port is enabled and a link has been established
off The Gigabit port is disabled
Gigdoc.book Page 13 Tuesday, October 17, 2000 9:44 AM