Ringdale Gigabit - Manual (Page 35)

Chapter 4 Using the command line interface
100-398-01 27
Comm
and line
Setting the Gigabit port VLAN tagging mode
The set gigabit port VLAN tagging mode command enables or disables the 802.1p priority tagging of frames onto
Gigabit Ethernet.
Setting the Gigabit port VLAN identity
The set gigabit port VLAN ID command sets the Gigabit port VLAN identity. For this command to take effect,
you must have already enabled VLAN 802.1p priority tagging on the selected port.
Command: >set Gigabit port VLAN tagging mode <slot>:<port> <1,2>
Parameter: slot Slot number
port Port number
1 Enable
2 Disable
Command: >set Gigabit port VLAN ID <slot>:<port> <number>
Parameter: slot Slot number
port Port number
number VLAN ID
Gigdoc.book Page 27 Tuesday, October 17, 2000 9:44 AM