Setting the gigabit port flow negotiation mode – Ringdale Gigabit User Manual
Page 32
Advertising
Chapter 4
Using the command line interface
24
Using the Smart Ringswitch Gigabit Module
Setting the Gigabit port flow negotiation mode
The
set gigabit port flow negotiation mode
command specifies the way the Gigabit Module negotiates flow
control with a connecting device.
Command:
>set Gigabit port flow negotiation mode <slot>:<port> <1,2,3,4>
Parameter:
slot
Slot number
port
Port number
1
None
2
Tx only
3
Rx only
4
Tx and Rx
Gigdoc.book Page 24 Tuesday, October 17, 2000 9:44 AM
Advertising