Roland SPD-S - Manual (Page 108)

108
Effect List
19: DISTORTION
Distorts a sound heavily. By outputting a sound without distortion at low frequency, a sound can be roughened without
weakening the sound of drum loops and the like.
fig.Distortion
In addition, if you press the PAGE buttons, “Knob,” “Velo” and “Pedal” are displayed. You can then select the parameters to be
controlled with the EFFECTS CONTROL knob, the strength (velocity) used in hitting a playing surface, and the expression pedal.
Parameter Value Descriptions
Drive 0–127 Rate of distortion
Tone 0–127 Tone quality
DriveCutoff 0–127 Control of the cut-off frequency at which the distorting effect is applied
DriveLevel 0–127 Volume of the distorted sound
LowMix OFF, ON Selection of low-frequency output
Value Parameters controlled with Knob and Pedal (See the table above for details.)
OFF —
DRIVE Drive
TONE Tone
CUTOFF DriveCutoff
DRIVELEVEL DriveLevel
Value Parameters controlled with Velo
(See the table above for details.) Descriptions
OFF — —
DRIVE Drive —
TONE Tone —
CUTOFF DriveCutoff —
DRIVELEVEL DriveLevel —
DYNAMIC Drive, Tone, DriveCutoff, DriveLevel The sound becomes more dynamic as strike force increases.
L out
Distortion
L in
DriveLevel
High
LowMix
Low
Frequency
Split
R out
Distortion
R in
DriveLevel
High
LowMix
Low
Frequency
Split
SPDS_e.book 108 ページ ２００４年４月１９日 月曜日 午前９時５８分