Roland SPD-S - Manual (Page 42)

42
Chapter 2 Wave Editing
Jumping to the top of internal memory or the memory
card
Press [CARD] to alternately jump to the top wave number in the internal
memory and to that of the memory card.
Jumping to a new (empty) wave number
Hold down [SHIFT] and press [FUNC] to jump to a new (empty) wave
number.
Enabling/disabling ambience
To turn ambience ON , hold down [SHIFT] and press [EFFECTS], so that
“ Ambience ON ” appears in the display.
To turn ambience OFF , hold down [SHIFT] and press [EFFECTS], so that
“ Ambience OFF ” appears in the display.
Ambience cannot be individually enabled or disabled for different patches.
Effects are unavailable in wave mode. [EFFECTS] is unlit.
For details on ambience, see p.
76.
SPDS_e.book 42 ページ ２００４年４月１９日 月曜日 午前９時５８分