Roland SPD-S - Manual (Page 92)

92
Effect List
Configure the effects to be applied to a patch.
Use the PAGE buttons to select the parameter, and press [-]/[+] to change the value.
Useful Functions for Changing Effect Parameters (Patch Edit)
• The pad indicator is lit when Effects SW (p. 36) in PAD CONTROL is set to ON or VELO for the corresponding playing
surface.
* No effects are applied to the playing surfaces for which the pad indicators are unlit.
* In the screen for parameter “Velo” in effect types, only the pad indicators for the playing surfaces for which Effects SW in PAD
CONTROL is set to VELO are lit.
• Each time you hold down [SHIFT] and hit a playing surface, the value of Effects SW (p. 36) in PAD CONTROL is alternately
set to ON and OFF. No settings for any playing surface for which the Effects SW is set to VELO can be changed if you hold
down [SHIFT] and hit it.
• If you hold down [SHIFT] and press [FUNC], the parameter is reset to its initial value.
• If you hold down [EFFECTS] and press [EDIT] in patch mode, the SPD-S displays the effect parameter screen.
• If you press [FUNC] in an effect parameter screen for any parameter other than Type, Knob, Velo and Pedal, you can change
the value with the EFFECTS CONTROL knob as well as with [-]/[+]. This comes in handy when you want to make a
substantial change to a value. Press [FUNC] again to switch the EFFECTS CONTROL knob to its original function.
* For parameters with a wide value range, fine control cannot be made with the knob. Press [-]/[+] to make fine control.
• If you rotate the EFFECTS CONTROL knob, the reproduced sound is changed although the value on the screen is not
changed. If there is any difference between the reproduced sound and the value on the screen, a “*” symbol is displayed next
to the value. If you hold down [SHIFT] and press [EXIT], the changes made to the effects of the patch are cancelled and the
“*” symbol disappears.
• If you change the effect type, parameter values for different effect types are remembered. When you change the patch,
the parameters for all the effect types other than the one currently selected are reset to their respective initial values.
SPDS_e.book 92 ページ ２００４年４月１９日 月曜日 午前９時５８分