Roland PCR-500 - Manual (Page 26)

26
Using PCR Editor
Program Change (Min-Max) [Cn pp]
Assign a program change message (with a variable
program number).
fig.EditorPC2.eps_35
You can specify the following parameters for
Program Change (Min-Max).
* The range of the program number [pp] is 1–128.
Bank Select + Program Change
[Bn 00 mm Bn 20 ll Cn pp]
Assign a bank select message and program change
message (all values fixed).
fig.EditorBankSelect.eps_35
You can specify the following parameters for Bank
Select + Program Change.
* The range of the program number [pp] is 1–128.
Program Change – Dec
Assign the program change decrement function (PC
DEC).
This will transmit a program change number that is
one less than the program change number most
recently transmitted in the PCR’s program change
mode.
fig.EditorPCDec.eps_35
There are no parameters to specify for Program
Change – Dec.
Channel Message
Item Content
MIDI Channel MIDI channel [n]
Min Number
Lower limit of the program
number [pp].
Max Number
Upper limit of the program
number [pp].
Item Content
MIDI Channel MIDI channel [n]
Bank MSB Bank number MSB [mm]
Bank LSB Bank number LSB [ll]
PC Number Program number [pp]
PCR-300_500_800_e.book 26 ページ ２００６年１２月１９日 火曜日 午後２時５９分