Roland PCR-500 - Manual (Page 49)

49
Settings (Edit mode)
fig.D-NoteSelect.eps
9 Press the [ENTER] button.
The display will indicate “N- -.”
* The - - portion shows the currently specified value.
10 Use the VALUE knob or controllers [A1]–[A8] and [B1]–[B8] to specify the
desired program number.
11 Press the [ENTER] button.
If you’ve assigned this basic editing function to [R1]–[R9], [S1]–[S9], or [P2], moving
the controller to the maximum position will transmit the specified program change
message.
PCR-300_500_800_e.book 49 ページ ２００６年１２月１９日 火曜日 午後２時５９分