Roland RK-300 User Manual
Page 107
107
Singing Along with the VIMA
Preparing the control pedal switch for use
With the factory settings, pedal operations will damper pedal.
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu-3-1.eps
* There are three menu screens. Touch
to switch screens.
3.
Touch < Controller >.
The following screen appears.
fig.d-Controller.eps
4.
Touch “Control Pedal Assign”
to choose “Vocal Effect.”
5.
Press [EXIT] to complete the setting.
Turning the effect on/off
6.
Press the pedal.
The effect will turn on/off each time you press the pedal. When the effect is on, the [EFFECTS] button
will light.
RK-300_e.book 107 ページ 2008年9月10日 水曜日 午後4時6分