Roland RK-300 - Manual (Page 66)

66
Performing
Specifying where the keyboard is divided (Split Point)
Here’s how to specify the note (split point) at which the keyboard is divided when using split
performance.
This setting is remembered for each user button.
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu-3-1.eps
* There are three menu screens. Touch to switch screens.
3.
Touch < Layer/Split >.
The following screen appears.
fig.d-LayerSplit.eps
4.
Touch “Split Point” to make the setting.
If you touch < Reset >, all settings (parameters) shown in the current screen will return to
their factory-set values.
5.
When you’re finished making adjustments, press the [EXIT] button.
Setting
B1–B6
RK-300_e.book 66 ページ ２００８年９月１０日 水曜日 午後４時６分