Roland RK-300 User Manual
Page 59
Advertising
59
Performing
Selecting user tones
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until the main screen appears.
2.
Touch < User > tab.
The screen will show three buttons assigned to user sounds. You can also select these sounds by
pressing tone buttons [1], [2], or [3].
fig.d-userTone1.eps
3.
Touch the user tone indication in the screen to select a user tone.
You can also select a user tone by pressing the [1], [2], and [3] INSTRUMENT buttons of the panel.
You will hear the selected tone when you play the keyboard.
fig.d-UserToneSel.eps
RK-300_e.book 59 ページ 2008年9月10日 水曜日 午後4時6分
Advertising